EPDM Rubber Waterproofing Membranes (Thickness: 1.2mm /1.5mm/ 2.0mm)
-
Payment
-
Origin
China Mainland
-
Minimum Order
1
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
-
Fuhua, one of the largest China manufacturers and suppliers, now brings you epdm rubber waterproofing membranes (thickness: 1.2mm /1.5mm/ 2.0mm) from its professional factory. Please rest assured to buy.
Model NO.:Thickness: 1.2mm 1.5mm 2.0mm
Type:Roofing and Waterproofing
Ceiling Tile Shape:Roll
Material:EPDM
Thickness:1.2mm
Ceiling Tile Type:All Kinds
Surface Treatment:Roll Coated
Function:Waterproof
Certification:ISO
Color:Black
Usage:Outdoor
Specification:ISO9001:2000, ISO14001
HS Code:3920109090
Product Detail
Products Description
(OP)EPDM Rubber Waterproofing membranes is a synthetic rubber, synthetic tire blends as the base material, adding reinforcing agents, softeners, antioxidants, curing agents processing aids to promote mixing by kneading, mixing, extrusion, rolling and curing, shaping and other processes can be processed into sheet curling volume of new high elastic waterproof material.
Products Specification
Category: Single, Compound and Reinforced
Thickness: 1.2mm 1.5mm 2.0mm
Width: 1.2m
Length: 10-50m
Physical Properties
(OP)EPDM Rubber Waterproofing membranes physical propertites
The item name | Applicable test items | ||||
(N/cm) Tension Strength(MPa) | ≥ Normal temperature≥ | 7.5 | GB6.3.2 | ||
60ºC≥ | 2.3 | ||||
% Elongation at break | ≥ Normal temperature≥ | 450 | |||
-20ºC | 200 | ||||
N Tear strength N | ≥ | 25 | GB6.3.3 | ||
(0.3MPa.30 min)Water tightness | No seeage | GB6.3.4 | |||
(ºC) ≤ Flexibility at low temperature ≤ | -40 | GB6.3.5 | |||
(mm) Heat expansion (mm) | ≤ Extended ≤ | 2 | GB6.3.6 | ||
≤ Contraction ≤ | 4 | ||||
(80ºC×168h) Hot air ageing | ,%≥ Fracture tensile strength retention %≥ | 80 | GB6.3.7 | ||
,%≥ Keep rate tore elongation %≥ | 70 | ||||
[10%Ca(OH)2 ×168h] Alkaline [10%Ca(OH)2 Normal temperature×168h] | ,%≥ Fracture tensile strength retention %≥ | 80 | GB6.3.8 | ||
,%≥ Keep rate tore elongation %≥ | 80 | ||||
(40ºC×168h),200×10-8 Ozone aging | - | GB6.3.9 | |||
Artificial climate ageing | ,%≥ Fracture tensile strength retention %≥ | 80 | GB6.3.10 | ||
,%≥ %≥ | 70 | ||||
Bond peel strength | N/mm≥ Standard test condition | 1.5 | GB6.3.11 | ||
(×168h) %≥ | 70 | ||||
Mainly used in all types of Industrial and civil buildings roofing, office buildings, supermarkets, steel roofing, basements, tunnels, bridges and other impermeable, waterproof construction.
- Reinforce Layer For SBS Waterproof Membrane Polyester Fabric 1 Pieces / (Min. Order)
- Tpo Waterproof Membrane 1 Pieces / (Min. Order)
- Reinforce Layer For SBS Waterproof Membrane Polyester Fabric 1 Pieces / (Min. Order)
- HDPE Cross Laminated Self Adhesive Bitumen Membrane (MBA-CL) 1 Pieces / (Min. Order)
- Dimpled Drain Sheets --HDPE Dimple Membrane 1 Pieces / (Min. Order)
- China Top2 Manufacturer Much Lower Cost, Earlier Delivery Time, PP Spun Bonded Non Woven Fabric B1 1 Pieces / (Min. Order)
- 3/4/5mm SBS Fiberglass Reinforcement Based Modified Bitumen PE/Aluminum Foil/Sand/Mineral Surface Torch Applied Roofing Felt Root Resistance Waterproofing Membrane Roll Cold Weather Low Temperature 1 Pieces / (Min. Order)
- 3/4/5mm Thickness SBS Polyester Reinforcement Based Modified Bitumen PE/Aluminum Foil/Sand/ Mineral Surface Torch Applied Roofing Felt Root Penetration Resistance Waterproofing Membrane Roll 1 Pieces / (Min. Order)